Huijing Metal Products Co., Ltd.
Stainless steel Lacing anchor /quilting pins/ Square and round self-lockingwashers/Dome caps/2 holes lacing washers and lacing hooks/cup headwelding pins/ welded D-rings/self adhesive insulation stick pins/ PerforatedBase insulation pins/CD weld pins/Stainless steel toggle Latches/Stainlesssteel banding/Stainless steel wing seals/ Stainless steel springs
Product Application
Insulation Blankets/fireproof covers/thermal jackets/marine/ shipyard/Duct insulation/curtain wall.
Lacing Anchors are available in round head orectangular head, the material is available instainless steel or Galvanized steel, the pindiameter is in 12 Gauge or 14 Gauge, the standard pin length is in 1.5″2.5″ 3.5″4.5″ 6.5″etc,other lengths are available by special order.
Quilting Pins and washers are used inremovable insulation Jackets/Blankets/Coversto provide Quilting(Support)when install theinsulation blankets or covers to fabricate athermalinsulation system,when Quilting pinsand washers are installed on the removablereusable insulation blankets or covers, theinside insulation will not settle down or slidearound inside.
Quilting pins head diameter is 1-3/16″ (30mm), the pin diameter is available in 12Gauge(2.7mm)or 14 Gauge(2.0mm) the lengths are available in various sizes, butstandard length is 1″(25mm),1-1/2″(38mm),2″(50mm),2-1/2″(65mm) and4-1/2″(114mm). the material is in stainless steel or low carbon steel, but popular isthe stainless steel quilting pins.
Both Round or Square self-locking washers areavailable as a matter of design or applicationpreference.The domed, multi-lanced holedesign provides for ease of locating washer onpin and positive locking, Most styles of washers aremanufactured with a beveled edge to prevent the washer from cutting into theinsulation facing,
Cup head pins is a kind of weld insulation pinsthey are fabricated by a round washer headwith a nail,the head diameter is available in25mm,30mm and38mm,the nail diameter isavailable in 14 Gauge(2.0mm),12 Gauge(2.7mm)or 10 Gauge(3.4mm),the material isavailable in stainless steel, mild steel, when it ismild steel version,the pin can be galvanized orcopper coated. Our cup head pins are mostlysold to US, Canada or Europe market, In US and Canada, customers purchasethem at 30mm (1-3/16″) head, the pin diameter is in 12 Gauge, the length will be3/8″1″1-/8″1-/1/2″1-7/8″2″3″ 4″up to 8-1/2″etc,In Europe, customer purchasethem at 22mm,27mm,32mm,38mm,42mm,48mm, 52mm, 62mm etc, the headis in mild steel galvanized, but the pin will be copper coated or galvanized,customer also need the pin insulated or head insulated or both insulated
CD Weld Pins is a kind of insulation fastenerswe call CD insulation weld pins, they can bemanufactured in low carbon steel, Stainlesssteel, Aluminum.The low carbon steel CD weldpins are available in galvanized coated orcopper coated,The diameter is available in 14Gauge(2.0mm),12 Gauge(2.7mm),11 Gauge(3mm),10 Gauge(3.4mm),4mm, 5mm etc. thelength is available from 19mm from 500mm.
Our Perforated Base Insulation Stick Pins havethe same function as self-adhesive insulatingrod pins for fixing heavier insulating materials.After installing the insulation, you can use themor the dome cap and pin to wipe to fix the
insulation,In addition,these workpieces have
no adhesive tape on the base. There are 44small holes on the base,which are used to grabadhesives or allow screws to fix the base in
place, which can help you achieve good results.
Self adhesive Insulation self stick pins are madefrom a 50x50mm Metal base assembled with ametal nails, the base thickness is 0.4mm, thenail diameter is 12 Gauge( 2.7mm) and naillength is available in 19mm,32mm,38mm,41mm,50mm,63mm,89mm,114mm,140mm160mm,203mm etc,other size are available byspecial order.
The surfaces of these Aluminum InsulationDome Caps have been specially treated, so theyare not rough and have no burrs. lt is producedby one-time molding technology, and the overalshape is particularly beautiful without obviousseams.The edges are round and smoothwithout burrs. They can be installed quickly andare not easy to slip, We use thickened stainlesssteelto forge these products, so they caneffectively prevent corrosion, rust and oxidation, Their service life is very good,saving you a lot of maintenance and replacement costs. We have been engagedin this industry for many years, lf you have any questions, you can consult us.Dome Cap diameter:22mm,28mm,38mmInsert Self Lock Washer Size: 14 Gauge, 12 Gauge,11 Gauge, 10 GaugeAvailable Finishes:Silver/White/Black
Package Sizes: 1,000 Pack
Our Wire Lacing Hooks are made of stainlesssteel,galvanized steelor brass,and the diameteis usually 1.6mm or 1.7mm, are used to installinsulating pads on pipes,equipment,machinesetc. When using, you can fix them in the heatinsulation pad with pneumatic nails,place themon one side of the heat insulation pad, and shootthe sewing nails with a pneumatic gun to fix theheat insulation pad in place.
Wire Lacing Hooks
Application:Hooks for Installing Mattresses
Materials:Stainless Steel,Steel Galvanized, BrassSize:1.6mm/1.7mmx23.5mm
Lacing Hooks
Application:Washers for underside of mattresses
Material: Stainless Steel
Size:20.5×23.5mm
Stainless Steel Welded D Rings are manufactured from 304 Stainless Steel or 316 Stainless steel, the wire diameter is available in11 Gauge(3.0mm),10 Gauge(3.4mm) or 8 Gauge(4.0mm).The D Ring diameter is available in25mm(1),30mm,38mm(1.5″)or 50mm(2″).Other sizes are available per order. the joint isthrough weld processing, they are designed asbuckles for straps to secure the removable andreusable insulation blankets.
Stainless Steel Welded D Rings
Raw Material: 304 Stainless Steel, 316 Stainless Steel, 316L Stainless Steel
Diameter:25mm,30mm,38mm,50mm
Wire Diameter: 11 Gauge (3.0mm),10 Gauge (3.4mm),8 Gauge(4.0mm)
Joint: Welding Processing
Treatment: Polishing