Lacing Anchor

Lacing Anchor

SS Round rectangular base Lacing Anchor are typically used in the production of strapped blankets or removable blankets and are also widely employed in dockyards. During installation, the strap anchor is pushed into the front end of the insulation blanket or insulation board, allowing the hook head to snugly attach to the insulation blanket or board.

Lacing anchors are insulation fasteners that used for reusable and removable insulation blanket, work with self locking washer to fasten the blanket.

Introduction to SS Round Rectangular Base Lacing Anchor

Lacing Anchors are used in the fabrication of insulation blankets or removable covers/pads. The nail is pressed through the insulation material, so the hook portion sits on the top edge and the nail is secured on the opposite side of the insulation with a washer. The two sides of the blanket can then be “laced” together by the hooks with tie wire.

Special sizes are available upon request

Material	304 stainless steel low carbon steel is availbe
Surface treatment	Stainless steel: polishing Low carbon steel: galvanized coating
Head type	Round(rectangle is available)
Head diameter	7/8″(22mm)
Head thickness	1mm
Pin diameter	12 Gauge(2.7mm)/14 Gauge(2.0mm)
Pin length	2.5″ /4.5″ (63.5mm/114.3mm)
Application	Removable insulation blankets or jackets
Packing	1000pcs/carton